Based on the
TBI series, the TBHI is a robust execution of the bimetal thermometer
specially designed to be used in severe conditions, such as chemical
and petrochemical industries, power generation as well as marine and
offshore applications. The TBHI is universally suitable in plant,
machinery and tank construction but also in the general and process
industries such as food processing.
Due to the
completely welded construction made of stainless steel, the reinforced
case with a sealed bayonet ring, the protection class IP 68 according
to the EN 60529 standard and an optional security glass, the TBHI
is particularly robust and resistant against vibrations. The bayonet
ring is sealed with a silicone dustproof and leak proof gasket. At
the same time, the ring also allows to open the case in order to adjust
the thermometer directly from the front side.
The TBHI measures
temperature ranges from -70°C up to 600°C and conforms to
the accuracy classes 1 and 2 according to the EN 13190 standard. The
device is available with stem diameter 6 and 8 mm, and with a length
from 60 up to 1000 mm.
The device is offered
with a wide range of connections (fix and sliding). The thermometer
case can be tilted up to 90°. It can be orientated before mounting,
by rotating the harness assembly up to 360°.
For static
pressure above 10 bar, for high velocity applications, and for corrosive
fluids, the use of a thermowell is recommended. It allows removing
the thermometer without affecting the tightness of the system and
without stopping the process.
Germany - Press
Contact:
Konzept
PR GmbH, Andrea Finkel
Karolinenstr. 21, 86150 Augsburg
Tel.: +49 (0)8 21-343 00-15
Fax: +49 (0)8 21-343 00 77
E-Mail: a.finkel@konzept-pr.de
Internet: www.konzept-pr.de
Spain
- Press Contact:
Rafaela Almeida
Marketing & PR Manager
BlaNZ Marketing y Comunicación, S.L.
Rambla Catalunya 120 4º 4ª
08008 - Barcelona
Tel.: +34 93 528 57 89
Fax: +34 93 528 76 13
E-Mail: ralmeida@blanz.es
www.blanz.es
Company Contact
/ Denmark:
Baumer A/S, Mark van den Bosch, Jacob Knudens Vej 14, DK-8230 Aabyhoj
Tel.: +45 (0) 89 31 76 11, Fax: +45 (0) 86 25 65 77, E-Mail: info.dk@baumerprocess.com
Company Contact
/ Sweden:
Baumer A/S, Mark van den Bosch, Södra Lundavägen 10 - Box
117, SE-245 22 Staffanstorp
Tel.: +46 (0) 4623 4470, Fax: +46 (0) 4623 4479, E-Mail: info.se@baumerprocess.com
